Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to assign automated input values?

Posted 2 mag 2013, 01:37 GMT-4 Heat Transfer & Phase Change, Mesh, Studies & Solvers Version 3.5a, Version 4.0 1 Reply

nithin kumar
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Can we assign input values to faces of an object via .csv file or through any web based tools?
1 Reply Last Post 2 mag 2013, 02:11 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 mag 2013, 02:11 GMT-4
Hi

try loding your csv values into an interpolation function and then refer to that function within COMSOL there are a fwd examples in the model library, and it has been discussed on the Forum, typically for comparing experimental results or usig measured results in a simulation

--
Good luck
Ivar
Hi try loding your csv values into an interpolation function and then refer to that function within COMSOL there are a fwd examples in the model library, and it has been discussed on the Forum, typically for comparing experimental results or usig measured results in a simulation -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content