Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Eigenfrequency of Piezoelectric shunts

Please login with a confirmed email address before reporting spam

Hi, everyone
Recently, I try to utilize the coupling modules (Piezoelectric Device+ Electrical Circuit ) to evaluate the eigenfrequency of piezoelectric shunting system. However, I come across some difficulties. I find the Electrical Module doesn't support eigenfrequency calculation (it only supports stationary, frequency domain and time dependent). Are there anyone can help me solve this problem? The sketch map of the piezoelectric shunting system is attached.
Thank you.


1 Reply Last Post 31 mag 2013, 07:11 GMT-4
Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 mag 2013, 07:11 GMT-4

Hi,

you can run a frequency domain study around an estimate of the resonance frequency of your setup.

Cheers
Edgar
--
Edgar J. Kaiser
www.emphys.com
Hi, you can run a frequency domain study around an estimate of the resonance frequency of your setup. Cheers Edgar -- Edgar J. Kaiser http://www.emphys.com

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.