Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Please help if possible...
Posted 5 giu 2013, 20:23 GMT-4 3 Replies
Please login with a confirmed email address before reporting spam
Hi I am trying to work through this question - but I am really stuck I have been trying to get it done for 2 days. So it would be great if someone could help me.
Plot the non-dimensional velocity as a function of non-dimensional radial
location , at the following values of zeta = 0:01; 0:05; 0:1; 0:15 and 0:2 Label
your plot axes, and identify the di erent curves in the legend to the plot.
I do not know how to draw the cut lines for non dimensional values. I have managed to obtain the velocity surface plot.
The dimensionless variables are defined as:
xi = r/R zeta = z/Lc and phi = vz/v0
Plot the non-dimensional velocity as a function of non-dimensional radial
location , at the following values of zeta = 0:01; 0:05; 0:1; 0:15 and 0:2 Label
your plot axes, and identify the di erent curves in the legend to the plot.
I do not know how to draw the cut lines for non dimensional values. I have managed to obtain the velocity surface plot.
The dimensionless variables are defined as:
xi = r/R zeta = z/Lc and phi = vz/v0
3 Replies Last Post 7 giu 2013, 19:30 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
You can define the non-dimensional variables in the definition sub-section in the modelling section. Right click and select variable and define your variables. This is the pre-processing part.
For plotting which is the post-processing part, you can define a cut-line as a 1D plot and plot your variables.
Good Luck
You can define the non-dimensional variables in the definition sub-section in the modelling section. Right click and select variable and define your variables. This is the pre-processing part.
For plotting which is the post-processing part, you can define a cut-line as a 1D plot and plot your variables.
Good Luck
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi thank you for your response,
I think I am getting something wrong at the Cut Line 2D setting page - my line entry method is two points x: point 1 =0 and x point 2 = 1 y point 1 = 0 y point 2 = 0
I ticked bounded by points and additional parallel lines range(0.01,0.04,0.2) and it's not working... did I do something wrong in this setting?
I think I am getting something wrong at the Cut Line 2D setting page - my line entry method is two points x: point 1 =0 and x point 2 = 1 y point 1 = 0 y point 2 = 0
I ticked bounded by points and additional parallel lines range(0.01,0.04,0.2) and it's not working... did I do something wrong in this setting?
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Try first without additional lines and see if you can get the results you desire!
Then go to the next level!
Then go to the next level!