Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modelling of cryocooler in COMSOL

Posted 5 lug 2013, 06:42 GMT-4 Heat Transfer & Phase Change Version 4.3b 0 Replies

Ananya Kundu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I would like to model a heat extractor/cold stage in cryocooler in COMSOL. The cold stage of the cryocooler extracts heat from the attached mass through conduction. The cold stage maintains cooling capacity vs temperature plot e.g. 40W at 45 K, 20W at 35 K etc. I would like to know the temperature distribution along the mass which are attached to the cold stage so that we can estimate the heat load of the attchment.
Kindly suggest how to model the cold stage with cooling capacity. Kindly suggest whether heat source with negative heat load will solve the purpose? In that case how will I incorporate various cooling capacity vs temperature data onto it.


Thanks and regards
Ananya Kundu
0 Replies Last Post 5 lug 2013, 06:42 GMT-4
COMSOL Moderator

Hello Ananya Kundu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content