Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to measure the distance between two objects in COMSOL

Posted 20 ago 2013, 03:13 GMT-4 Geometry Version 4.3b 1 Reply

Jiuan Wei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

Can anyone tell me how to measure the distance between two objects in COMSOL, such as the distance between to surfaces, distance between one surface to another body?

Thanks.
1 Reply Last Post 20 ago 2013, 04:44 GMT-4
Fabio Greco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 20 ago 2013, 04:44 GMT-4
Hi,

you can measure a distance if you have an edge. In that case, you can use Geometry > Measurement, then select Edge (if you select a domain, you measure the volume, or the area from a boundary etc.).
Btw, did you import your geometry? otherwise, you have all the coordinates (and so distances) in your geometry sequence!

Cheers
Hi, you can measure a distance if you have an edge. In that case, you can use Geometry > Measurement, then select Edge (if you select a domain, you measure the volume, or the area from a boundary etc.). Btw, did you import your geometry? otherwise, you have all the coordinates (and so distances) in your geometry sequence! Cheers

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content