Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol Error

Posted 22 ago 2013, 08:45 GMT-4 Geometry, Mesh, Results & Visualization, Structural Mechanics Version 4.3b 1 Reply

Ralf Buchwald
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I have tried to "remesh deformed geometry" on a dataset in order to export the deformed geometry as stl-file but I get the following error:

=>unsupported operation for mesh of virtual composite face
face 64

I have made some simlifications with the imported CAD geometry like "ignore edges" and "ignore vertices" in the vicinity of face 64. There are no errors or warnings with the tetrahedral mesh generated on this basis. The deformed result also seems to be error-free, it shows realistic deformation.

I can't find any documentation on this error.

Has anybody an idea? Thank you in advance!

Best regards,
Ralf.

1 Reply Last Post 11 nov 2014, 07:34 GMT-5
COMSOL Moderator

Hello Ralf Buchwald

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Guo Shusen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 nov 2014, 07:34 GMT-5

Hi,

I have tried to "remesh deformed geometry" on a dataset in order to export the deformed geometry as stl-file but I get the following error:

=>unsupported operation for mesh of virtual composite face
face 64

I have made some simlifications with the imported CAD geometry like "ignore edges" and "ignore vertices" in the vicinity of face 64. There are no errors or warnings with the tetrahedral mesh generated on this basis. The deformed result also seems to be error-free, it shows realistic deformation.

I can't find any documentation on this error.

Has anybody an idea? Thank you in advance!

Best regards,
Ralf.


hi，bro，have you solve the problem？

[QUOTE] Hi, I have tried to "remesh deformed geometry" on a dataset in order to export the deformed geometry as stl-file but I get the following error: =>unsupported operation for mesh of virtual composite face face 64 I have made some simlifications with the imported CAD geometry like "ignore edges" and "ignore vertices" in the vicinity of face 64. There are no errors or warnings with the tetrahedral mesh generated on this basis. The deformed result also seems to be error-free, it shows realistic deformation. I can't find any documentation on this error. Has anybody an idea? Thank you in advance! Best regards, Ralf. [/QUOTE] hi，bro，have you solve the problem？

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content