Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to deal with meshing for the thin bodies

Posted 27 ago 2013, 02:57 GMT-4 Geometry, Mesh Version 4.3b 3 Replies

Jiuan Wei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

I am dealing with some very thin bodies, let's say, the thickness is 2mm, and width is 1000mm. I encounter difficulity to mesh these thin bodies.

Do anyone have some suggestions? Thanks.
3 Replies Last Post 2 set 2013, 02:29 GMT-4
Fabio Greco
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 ago 2013, 06:06 GMT-4
Hi,

see this very useful KB www.comsol.com/support/knowledgebase/120/, otherwise you can also use "Shell" elements if you're working in Solid Mechanics.
There's also a tutorial "thin_film_resistance", depending on your physics.

Kind regards
Hi, see this very useful KB http://www.comsol.com/support/knowledgebase/120/, otherwise you can also use "Shell" elements if you're working in Solid Mechanics. There's also a tutorial "thin_film_resistance", depending on your physics. Kind regards
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 29 ago 2013, 03:22 GMT-4
In 2D, try mapped mesh, in 3D swept mesh.
In 2D, try mapped mesh, in 3D swept mesh.
Jiuan Wei
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2 set 2013, 02:29 GMT-4
Hi Fabio and Lasse, thanks very much for your replies.

Hi Fabio and Lasse, thanks very much for your replies.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content