Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

pre-stress and unions in Structural Mechanics

Inazio Mugica Etxebarria

Please login with a confirmed email address before reporting spam

Hi,
I'm trying to model a simple axysymmetric assembly that is joined with a bolt as you can see in the attached file.
But I'm worried about the pre-stress I'm introducing in the model. In spite of not saying anything to the program, if the different geometries are in contact with each other, the program understands that there is an union between them. But, how does it work?
I really don't understand what Comsol is doing in this cases. I know that there are pairs that we can define, but it seems that the program ties different geometries without saying anything.
I think that this is important just because I'm not able to control these unions, I cannot assign any stiffness value to the union or anything similar. And it directly affects to the stiffness of the assembly.
The pre-stress value that I should enter is in relation with this too, because if Comsol is considering a perfect union, it' s introducing a stiffness to ay model, and I'd be over-stressing it.

Can anybody help me with these question please?
Thanks a lot,


0 Replies Last Post 12 feb 2014, 12:21 GMT-5
COMSOL Moderator

Hello Inazio Mugica Etxebarria

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.