Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
A simple integration problem
Posted 1 mar 2014, 08:31 GMT-5 Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
Hi
I need to integrate a curve with respect to time, but I dont know how to do so using COMSOL. My values representing my curve is a solution from a transient model, and is a ratio between two values hence dimensionless ([-]). A picture of the curve can be seen in the attached png-file.
I have tried "Definitions->Model Couplings->Integration" but it won't work since I'm asked to select a "Geometric entity level" which my curve dont have. I haven't had any luck using the mathematical in-built operators shown in the documentation. - or am I missing something?
I hope you can help me.
(I'm using COMSOL 4.3b)
Thanks in advance
I need to integrate a curve with respect to time, but I dont know how to do so using COMSOL. My values representing my curve is a solution from a transient model, and is a ratio between two values hence dimensionless ([-]). A picture of the curve can be seen in the attached png-file.
I have tried "Definitions->Model Couplings->Integration" but it won't work since I'm asked to select a "Geometric entity level" which my curve dont have. I haven't had any luck using the mathematical in-built operators shown in the documentation. - or am I missing something?
I hope you can help me.
(I'm using COMSOL 4.3b)
Thanks in advance
Attachments:
1 Reply Last Post 1 mar 2014, 17:05 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
You may want to have a look there: www.comsol.com/support/knowledgebase/913/
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com