Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
No temperatures calculated by the "Conjugate Heat Transfer" node in the fluid domain, if "solid mechanics" node is activated only for the solid domain
Posted 6 mar 2014, 05:15 GMT-5 Heat Transfer & Phase Change, Computational Fluid Dynamics (CFD), Structural Mechanics Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I have a mechanic system consisting of fluid and solid parts.
The problem is combined, it is mechanics and heat transfer.
I need to calculate heat transfer through both components -solid and fluid.
AND I need mechanic calculations.
The first problem is, that I cannot apply "Solid Mechanics" to a fluid area
but
if I exclude the fluid area from "Solid Mechanics", the COMSOL node "Conjugate Heat Transfer" computes only in the temperatures in the "solid" area, no temperatures any more in the fluid domain.
I attach a rpm-file
The problem is combined, it is mechanics and heat transfer.
I need to calculate heat transfer through both components -solid and fluid.
AND I need mechanic calculations.
The first problem is, that I cannot apply "Solid Mechanics" to a fluid area
but
if I exclude the fluid area from "Solid Mechanics", the COMSOL node "Conjugate Heat Transfer" computes only in the temperatures in the "solid" area, no temperatures any more in the fluid domain.
I attach a rpm-file
Attachments:
1 Reply Last Post 7 mar 2014, 03:42 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
The solution is found in thread
www.comsol.com/community/forums/general/thread/42841/
with the answer of Jesus Lucio
www.comsol.com/community/forums/general/thread/42841/
with the answer of Jesus Lucio