Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

stratification

Posted 12 mar 2014, 05:53 GMT-4 Heat Transfer & Phase Change, Structural Mechanics Version 4.3a 3 Replies

Mikhail Polous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone!
Let's picture three objects densely pressed to each other. First object is heated, the other one is cooled, and the third is in between. Certain temperatures cause a gap between objects because of thermomechanical expansion and different properties of materials. How to make the progam see that three objects pressed to each other are not a single object? How to make in the program a microscopic gap between objects without geometrical modeling?

Attachments:

3 Replies Last Post 13 mar 2014, 10:04 GMT-4
Niklas Rom COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 mar 2014, 08:22 GMT-4
Hi Mikhail,
this is called thermal contact. See the two downloadable examples:
www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119
www.comsol.com/model/thermal-contact-resistance-between-an-electronic-package-and-a-heat-sink-14659

kind regards,
Niklas



Hi everyone!
Let's picture three objects densely pressed to each other. First object is heated, the other one is cooled, and the third is in between. Certain temperatures cause a gap between objects because of thermomechanical expansion and different properties of materials. How to make the progam see that three objects pressed to each other are not a single object? How to make in the program a microscopic gap between objects without geometrical modeling?


Hi Mikhail, this is called thermal contact. See the two downloadable examples: http://www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119 http://www.comsol.com/model/thermal-contact-resistance-between-an-electronic-package-and-a-heat-sink-14659 kind regards, Niklas [QUOTE] Hi everyone! Let's picture three objects densely pressed to each other. First object is heated, the other one is cooled, and the third is in between. Certain temperatures cause a gap between objects because of thermomechanical expansion and different properties of materials. How to make the progam see that three objects pressed to each other are not a single object? How to make in the program a microscopic gap between objects without geometrical modeling? [/QUOTE]
Mikhail Polous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 mar 2014, 09:00 GMT-4
Niklas Rom, thanks a lot!
Niklas Rom, thanks a lot!
Mikhail Polous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 13 mar 2014, 10:04 GMT-4

Hi Mikhail,
this is called thermal contact. See the two downloadable examples:
www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119
www.comsol.com/model/thermal-contact-resistance-between-an-electronic-package-and-a-heat-sink-14659

kind regards,
Niklas


In the example (www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119), it is written that:

HEAT TRANSFER IN SOLIDS
Pair Thermal Contact 1
1 On the Physics toolbar, click Pairs and choose Pair Thermal Contact.
2 In the Pair Thermal Contact settings window, locate the Pair Selection section.
3 In the Pairs list, select Contact Pair 1.
4 Locate the Contact Surface Properties section. From the p list, choose Contact
pressure (solid/cnt1)...

but section Pairs does not contain Pair Thermal Contact ... I have 4.3a version... Where can I find Pair Thermal Contact?

[QUOTE] Hi Mikhail, this is called thermal contact. See the two downloadable examples: http://www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119 http://www.comsol.com/model/thermal-contact-resistance-between-an-electronic-package-and-a-heat-sink-14659 kind regards, Niklas [/QUOTE] In the example (http://www.comsol.com/model/simulation-of-multiphysics-contact-in-a-power-conductor-4119), it is written that: HEAT TRANSFER IN SOLIDS Pair Thermal Contact 1 1 On the Physics toolbar, click Pairs and choose Pair Thermal Contact. 2 In the Pair Thermal Contact settings window, locate the Pair Selection section. 3 In the Pairs list, select Contact Pair 1. 4 Locate the Contact Surface Properties section. From the p list, choose Contact pressure (solid/cnt1)... but section Pairs does not contain Pair Thermal Contact ... I have 4.3a version... Where can I find Pair Thermal Contact?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.