Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to support flexible tube.

Posted 20 mar 2014, 15:24 GMT-4 Fluid & Heat, Computational Fluid Dynamics (CFD), Geometry, Structural Mechanics Version 4.4 2 Replies

Barrett Hutto
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi-

I am doing a 3D FSI model on a simple branched artery with blood flow. I naturally want the artery to expand and contract as the fluid moves though. What is the best way to constrain the inlets / outlets? Rollers do not add enough constraint and fixed edges constrict the artery from expanding / contracting. In addition, I get high stresses at the areas of constraint.

Attached is a picture of the geometry where the arrows are the fluid flow

Thanks,
Barrett
2 Replies Last Post 21 mar 2014, 23:37 GMT-4
Barrett Hutto
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 mar 2014, 11:14 GMT-4
Attached is the picture of the geometry.
Attached is the picture of the geometry.

Attachments:

Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 21 mar 2014, 23:37 GMT-4
Hi Barrett,

One way to define constraints that prevent rigid body motions without causing localized stresses, and without preventing contraction/expansion, is to define displacement constraints on each end of the artery in a “distributed” sense. Conceptually you would fix the average X, Y and/or Z displacement of a boundary to be zero instead of fixing a specific point or the whole boundary.

You can do that by defining a Component Coupling operator, type Average then using it in a Global Constraint. For example if your operator is aveop1() you can set a global constraint to “aveop1(u)” to set the average displacement of the boundary in the X direction to zero.

Nagi Elabbasi
Veryst Engineering
Hi Barrett, One way to define constraints that prevent rigid body motions without causing localized stresses, and without preventing contraction/expansion, is to define displacement constraints on each end of the artery in a “distributed” sense. Conceptually you would fix the average X, Y and/or Z displacement of a boundary to be zero instead of fixing a specific point or the whole boundary. You can do that by defining a Component Coupling operator, type Average then using it in a Global Constraint. For example if your operator is aveop1() you can set a global constraint to “aveop1(u)” to set the average displacement of the boundary in the X direction to zero. Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content