Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how to model 128 Y cut LiNbO3 ( piezoelectric material ) in a 2-D domain

Posted 23 mar 2014, 11:14 GMT-4 Acoustics & Vibrations Version 4.2a, Version 4.4, Version 5.1 2 Replies

Ying Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

In my project, I want to model a 128 Y cut LiNbO3 substrate in a 2-D domain. However, in the coordinate system selection, Comsol only allows me to select, like XY, YZ... Plane material system. But I want to select 52' YX plane material system. Can I do this in Comsol in 2 D domain or I have to jump to 3D domain?


Thanks.
2 Replies Last Post 6 nov 2016, 06:13 GMT-5
COMSOL Moderator

Hello Ying Zhang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Pandiyarajan G
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23 apr 2014, 02:48 GMT-4
i am also have same problem that the rotated orientation is possible in comsol. and can you help me, how i will calculate S parameter value of frequency domain analysis in SAW resonator model
i am also have same problem that the rotated orientation is possible in comsol. and can you help me, how i will calculate S parameter value of frequency domain analysis in SAW resonator model
p bh
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 6 nov 2016, 06:13 GMT-5
i think you can complete the simulation in 3-D domain, setting the depth (aperture) thin enough to redue compution time
i think you can complete the simulation in 3-D domain, setting the depth (aperture) thin enough to redue compution time

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content