Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
[Tertiary Current Distribution] Electrode Current (boundary condition)
Posted 11 apr 2014, 04:49 GMT-4 Battery Design Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I'm new to COMSOL and numerical modeling and I'm currently trying to understand the "Electrode Current" node in the "Tertiary Current Distribution" physics using the v_flow_battery example from the model library (positive cell). Maybe someone can clarify things up for me: Basically that node sets a boundary condition for the electronic potential by specifing a total current over the whole boundary. Unfortunately it is not clear to me, how this is done numerically.
Basically I would expect that the electronic potential is changed until the integral over the current density distribution at the boundary meets the electronic current condition (i.e. the boundary integral over the specified average current density (parameter: i_avg)). The potential then should be determined by the specific electrical conductivity of the boundary material (parameter: sigma_e).
If I set a boundary probe to evaluate the average electronic current density (tcdee.NormIs) on the boundary, then it doesn't match the specified boundary condition. Why is that so?
I'd really appreciate some helpful comments on this,
Christian
Hello Christian S.
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.