Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
3-D Oxygen diffusion multiphysics model to simulate shelf-life urgent please!!
Posted 3 mag 2014, 03:19 GMT-4 Chemical Reaction Engineering Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
i'm trying to solve a problem concerning the permeation of oxygen in a 3-D object where i have an internal gas headspace ("Transport of species concentrated)and other internal water domain (Transport in species diluited").The external domains are plastics modelled with a "Flow in porous media".
The B.C. are concentration on the external surfaces fixed (Coxigenair) instead in the internal surfaces I made some boundary pairs and fixed "continuity" B.C.. The problem is time dependent and i want know the concentration in the water during an year of time.
The mesh is a simple tetrahedral mesh physics controlled.The solver used is the GMRES with default parameters.
Now i have set all the model but i have a warning with the geometry imported to CAD model. I have an edge smaller the minimum dimension (also with Extra fine).
Now i found this error:
"Very ill conditioned preconditioner: The relative residual is more than 1000 times larger than the relative tolerance.
What's the problem??Depend on the geometry warning How i could set the solver??
Thanks in advance
Hello S. Desiderio
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.