Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

need help

Posted 20 ago 2014, 14:21 GMT-4 Low-Frequency Electromagnetics, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.4 1 Reply

Fatimah Mohandesi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi I want to simulate magnetic field around a multi turn coil with different core shapes. please help mee
1 Reply Last Post 27 ago 2014, 07:07 GMT-4
Mark Harradine
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 ago 2014, 07:07 GMT-4
A good starting point for modelling fields from multi turn coils is given in the following:

www.comsol.com/model/single-turn-and-multi-turn-coil-domains-in-3d-14067

If the models you want to run are stationary, then the above should be all you need. If you are looking at time dependant models, there are a few other considerations that need to be made. I am far from an expert, but will try and help if you have further questions!
A good starting point for modelling fields from multi turn coils is given in the following: http://www.comsol.com/model/single-turn-and-multi-turn-coil-domains-in-3d-14067 If the models you want to run are stationary, then the above should be all you need. If you are looking at time dependant models, there are a few other considerations that need to be made. I am far from an expert, but will try and help if you have further questions!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content