Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to fix auto save option while a simulation is running??
Posted 20 set 2014, 11:15 GMT-4 Version 4.2 1 Reply
Please login with a confirmed email address before reporting spam
Please some one help me to fix the following:
1) I am using 4.2 version of comsol. Once the simulation stops, I have to start it from the beginning.
Is there any auto save options?
2) While I am running a transient cases with very fine time step, my c drive goes out of space. I believe this happens because, it saved for all time steps.
Is there any technique to save few time steps instead of all?
Thanks in advance
Anup
Hello Anup Paul
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Dear All
Please some one help me to fix the following:
1) I am using 4.2 version of comsol. Once the simulation stops, I have to start it from the beginning.
Is there any auto save options?
2) While I am running a transient cases with very fine time step, my c drive goes out of space. I believe this happens because, it saved for all time steps.
Is there any technique to save few time steps instead of all?
Thanks in advance
Anup
Hi Anup,
1- check the recovery files. You may find your file there.
2- yes. you can let the solver to chose the time steps. you can play with tolerance values for accuracy. Then. there is also an option to save steps from solver or specified steps.