Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Shallow channel Approximation
Posted 1 ott 2014, 20:55 GMT-4 Fluid & Heat Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I'm using COMSO 4.4 (Classkit version) and under laminar flow "use shallow channel approximation" option is missing. Actually it should be under Laminar flow------>turbulent model type-----> ***** . The whole turbulent model type part is missing. Is it something wrong with classkit version or different made for 4.4 version. Your comments are much appreciated!
Thanks
I'm using COMSO 4.4 (Classkit version) and under laminar flow "use shallow channel approximation" option is missing. Actually it should be under Laminar flow------>turbulent model type-----> ***** . The whole turbulent model type part is missing. Is it something wrong with classkit version or different made for 4.4 version. Your comments are much appreciated!
Thanks
Attachments:
1 Reply Last Post 6 ott 2014, 07:38 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Dear Rajeendra,
to be able to use the shallow channel approximation in 2D, you need the microfluidics or CFD module as shown in this list:
www.comsol.com/products/specifications/fluid-flow/
Probably your class kit does not support either of these modules. You can check this under "Menu>>File>>licensed and used products".
Best regards,
Frank
to be able to use the shallow channel approximation in 2D, you need the microfluidics or CFD module as shown in this list:
www.comsol.com/products/specifications/fluid-flow/
Probably your class kit does not support either of these modules. You can check this under "Menu>>File>>licensed and used products".
Best regards,
Frank