Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
help me for pcf modeling
Posted 21 apr 2010, 08:17 GMT-4 3 Replies
Please login with a confirmed email address before reporting spam
hi
i 'm doing a project about pcf(photonic crystal fiber), i choose the 2D pependicular hybrid-mode wave and select mode analysis, i set the subdomain & boundary & in properties i set the "specify eigen values using" for effective mode index & ... & generate mesh for that .
but i don't know what's the setting for finding effective mode index in solver parameters ? , i set it to a greater value of core index, but the result isn't good and don't show the effective mode(HE11 mode) and effective index
please help me for this problem
thanks a lot
i 'm doing a project about pcf(photonic crystal fiber), i choose the 2D pependicular hybrid-mode wave and select mode analysis, i set the subdomain & boundary & in properties i set the "specify eigen values using" for effective mode index & ... & generate mesh for that .
but i don't know what's the setting for finding effective mode index in solver parameters ? , i set it to a greater value of core index, but the result isn't good and don't show the effective mode(HE11 mode) and effective index
please help me for this problem
thanks a lot
3 Replies Last Post 21 apr 2010, 18:04 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I beleive its what is already discussed a couple of times on the forum, try a search (just left for the [Go] just above) try Effective index, or mode index,
there you will find discussion susch as
www.comsol.com/community/forums/general/thread/3034/
Have fun Comsoling
Ivar
I beleive its what is already discussed a couple of times on the forum, try a search (just left for the [Go] just above) try Effective index, or mode index,
there you will find discussion susch as
www.comsol.com/community/forums/general/thread/3034/
Have fun Comsoling
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
hi dear,
thank you very much for your answer,but can i specify one propagation mode (for example HE11) in the femlab?
i want "neff" for basic propagation mode in the fiber that propagate maximum of power in the fiber & i don't want the maximum of the "neff"
but the femlab give me the maximum of the "neff", please help me for my problem.
thanks&bye
thank you very much for your answer,but can i specify one propagation mode (for example HE11) in the femlab?
i want "neff" for basic propagation mode in the fiber that propagate maximum of power in the fiber & i don't want the maximum of the "neff"
but the femlab give me the maximum of the "neff", please help me for my problem.
thanks&bye
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
hi dear,
i perusal this paper:
www.medwelljournals.com/fulltext/ajit/2008/344-349.pdf
& i want to regenerate its results
thank you&bye
i perusal this paper:
www.medwelljournals.com/fulltext/ajit/2008/344-349.pdf
& i want to regenerate its results
thank you&bye