Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Transient laminar flow through a channel
Posted 1 mag 2010, 03:44 GMT-4 Studies & Solvers 1 Reply
Please login with a confirmed email address before reporting spam
Dear all,
I am solving the transient laminar flow through a channel. The steady state solver can give me the steady state solution. However, while using the transient solver, COMSOL does not solve it. The error message is:
Failed to find consistent initial values.
I have not idea what could be wrong with initial conditions (zero velocity, uniform pressure). Does anyone have experience with it? The model is attached here. Thanks a lot!
Regards,
Hainan
I am solving the transient laminar flow through a channel. The steady state solver can give me the steady state solution. However, while using the transient solver, COMSOL does not solve it. The error message is:
Failed to find consistent initial values.
I have not idea what could be wrong with initial conditions (zero velocity, uniform pressure). Does anyone have experience with it? The model is attached here. Thanks a lot!
Regards,
Hainan
Attachments:
1 Reply Last Post 1 mag 2010, 09:04 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Are you sure you're in laminar range? bit.ly/9yXDZC
It is always a good practice in Comsol to keep the units, so you can see if there is any human error.
It is always a good practice in Comsol to keep the units, so you can see if there is any human error.