Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Create nine hollow cylinders

Posted 1 dic 2014, 05:31 GMT-5 Heat Transfer & Phase Change, Geometry Version 4.3, Version 4.4 1 Reply

Kristoffer Kasiki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I need to create nine hollow cylinders (steel) that are surrounded by air. How do I do this? Actually the cylinders are placed 3x3 in a wooden pallet and they all have a temperature below 0 degrees celsius. I need to find out how long it would take for the cylinder in the middle to warm up to room temperature.

Thanks in advance!
Kristoffer
1 Reply Last Post 1 dic 2014, 13:17 GMT-5
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 1 dic 2014, 13:17 GMT-5
Chapter 7 of the Reference Manual covers geometry creation tools and functionalities.
The documentation is accessed through the File>Help>Documentation menu.
Best,
Jeff
Chapter 7 of the Reference Manual covers geometry creation tools and functionalities. The documentation is accessed through the File>Help>Documentation menu. Best, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content