Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Negative Concentration in Domain

Posted 5 mar 2015, 16:10 GMT-5 General, Electrochemistry Version 4.4 4 Replies

Kumar Krishnamoorthy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I've been trying to simulate the transfer of ions in a nano-channel using a Nernst-Placnk-Poisson-Boltzmann system, and I'm getting Negative Concentrations in the domain. Can someone help me with identifying possible mistakes in my model ?

Attachments:

4 Replies Last Post 9 mar 2015, 14:20 GMT-4
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 6 mar 2015, 03:18 GMT-5
Hi

The problem of negative concentrations has appeared on this forum repeatedly, and there is no easy way out. I have faced the same problem with convective diffusion. I almost got rid of it with better meshing in the channels. I used swept mesh across the channel with at least 10 elements and geometric distribution so that at the channel boundary the mesh was at densest. Convective diffusion is a notorious problem.

br
Lasse
Hi The problem of negative concentrations has appeared on this forum repeatedly, and there is no easy way out. I have faced the same problem with convective diffusion. I almost got rid of it with better meshing in the channels. I used swept mesh across the channel with at least 10 elements and geometric distribution so that at the channel boundary the mesh was at densest. Convective diffusion is a notorious problem. br Lasse
Sri Puranam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 6 mar 2015, 12:08 GMT-5
Hi Kumar,

What are your solver settings? Do you use a fully coupled solver ? You can use a segregated solver and use the "lower limit" option and force the lower limit to be zero.

If you problem is very stiff, you will have some convergence issues when you do this. You will have to mesh the "negative concentration region" very densely. Also I would suggest that you ramp up any source terms in your problem.

Let me know if it helps.

Thanks!
Sri.
Hi Kumar, What are your solver settings? Do you use a fully coupled solver ? You can use a segregated solver and use the "lower limit" option and force the lower limit to be zero. If you problem is very stiff, you will have some convergence issues when you do this. You will have to mesh the "negative concentration region" very densely. Also I would suggest that you ramp up any source terms in your problem. Let me know if it helps. Thanks! Sri.
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 6 mar 2015, 14:03 GMT-5
You will also find this knowledgebase article addresses this question.:
www.comsol.com/support/knowledgebase/952/

Best,
You will also find this knowledgebase article addresses this question.: http://www.comsol.com/support/knowledgebase/952/ Best,
Kumar Krishnamoorthy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 9 mar 2015, 14:20 GMT-4
Thank you all for your comments ! I found that having a finer mesh size helped with the issue.
Thank you all for your comments ! I found that having a finer mesh size helped with the issue.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content