Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Phase transformation in GMAW

Posted 30 mar 2015, 04:04 GMT-4 Heat Transfer & Phase Change, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 4.4 1 Reply

Basky
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi currently i am working in simulation of GMAW process and simulating distortion for any welded part. I have done heat transfer and heat conduction in simple butt weld and obtained temperature profile for the same.
Now i need to do phase transformation from ferrite/pearlite to austenite during heating and then austenite transformation to bainite/martensite during cooling.

Further, due to volume changes, i need to calculate residual stress and thereby to show the distortion in welded part... Please help on how to do these in COMSOL. Any model regarding phase transformation on steels, will be very helpful.
1 Reply Last Post 29 lug 2015, 09:42 GMT-4
COMSOL Moderator

Hello Basky

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Ioannis Bitharas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 29 lug 2015, 09:42 GMT-4
Although I haven't done it myself, I have considered it would be possible via the "heat transfer with phase change" feature in v. 5.0. However, you would need to have the data (k(T), cp(T) etc) for the material you are simulating through some kind of continuous cooling transformation diagram.
Although I haven't done it myself, I have considered it would be possible via the "heat transfer with phase change" feature in v. 5.0. However, you would need to have the data (k(T), cp(T) etc) for the material you are simulating through some kind of continuous cooling transformation diagram.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content