Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem unit parameter auxiliary sweep
Posted 30 lug 2015, 04:06 GMT-4 Structural Mechanics Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
I am applying a pressure step by step inside a cavity. For this I am using auxiliary sweep in stationnary solver to increase slowly the pressure otherwise it does not converge (I am using hyperelastic material). I apply 10 step of pressure by increasing 1000 Pa from previous step. The pressure applied are between 20000 Pa and 31000 Pa. So, I encounter a problem when I am plotting the maximum von mises stress in function of the pressure applied, the pressure applied inside the cavity is displayed in the range of order of 10^7 Pa!! It is not the pressure that I am applying in the boundary condition. So maybe somebody could help me? Do you have already meet such problem?
Thank you for your help! It would be very nice if somebody could help me!
Have a nice day!
Tim
Hello Tim B
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.