Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Stress

Posted 28 ago 2015, 11:19 GMT-4 Fluid & Heat, Computational Fluid Dynamics (CFD), Mesh, Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 4.4 1 Reply

Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,

i have a problem. I try to simulate a fluid flow effected by a boundary stress on a key hole. See attached mph-file.
With a very big mesh, comsol solve the problem. But with a smaller mesh, comsol does not solve the problem any more.
Have someone an idea why? Or what i can change to get a better convergence with this problem?
Thanks to all.
Best regards
Johannes

Attachments:

1 Reply Last Post 1 set 2015, 08:28 GMT-4
Hinrich Arnoldt COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 1 set 2015, 08:28 GMT-4
Dear Johannes,

your mesh is lacking boundary elements which you need for fluid flow.
Just switch to a physics induced mesh sequence to see how such a mesh is built up. The solver then also converges for larger meshes.

Best
Hinrich
Dear Johannes, your mesh is lacking boundary elements which you need for fluid flow. Just switch to a physics induced mesh sequence to see how such a mesh is built up. The solver then also converges for larger meshes. Best Hinrich

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content