Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Current in Induction Heating of cylindrical billet
Posted 2 ott 2015, 04:46 GMT-4 Electromagnetic Heating 0 Replies
Please login with a confirmed email address before reporting spam
I've done several tries for cylindrical billet induction heating simulation but real measured temperatures are completely different in comparison with simulated ones. The problem comes when introducing coil current. In measured experiments, with 280 A the billet reaches in a couple of minutes to temperatures above 1000 ºC. In simulation, if I give to the coil current the value of 280 A, simulated temperature does not rise more than 10 ºC in a couple of minutes. I need to set in simulation around 2500 A to obtain some similar output. I've tried two different kind of current application such as current density and single-turn coil, but both results were disappointing. Someone knows the reason?
I can upload the simulation file if necessary.
Thanks in advance!
Best regards,
Gorka.
Hello Gorka Plata
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.