Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
What does these error messgae mean?
Posted 27 set 2010, 07:56 GMT-4 2 Replies
Please login with a confirmed email address before reporting spam
Hi,
When I solve a nonlinear, coulped model in paramteric solver, the following message apperas:
Error:
Failed to find a solution for the initial parameter:
No convergence, even when using the minimum damping factor.
Returned solution has not converged.
Would you like to guide me how should I do in the next step?
Thank you very much!!
When I solve a nonlinear, coulped model in paramteric solver, the following message apperas:
Error:
Failed to find a solution for the initial parameter:
No convergence, even when using the minimum damping factor.
Returned solution has not converged.
Would you like to guide me how should I do in the next step?
Thank you very much!!
2 Replies Last Post 27 set 2010, 09:24 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
For me it always happened when I put non physical conditions. Try to proof read your initial conditions and www.comsol.com/support/knowledgebase/905/
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
it can also come from initial conditions that are too far away from the default "0", so sometimes ramping some large values, or just setting more realistic initial conditions might help.
But certanly, one should always recheck all BC with this message
--
Good luck
Ivar
it can also come from initial conditions that are too far away from the default "0", so sometimes ramping some large values, or just setting more realistic initial conditions might help.
But certanly, one should always recheck all BC with this message
--
Good luck
Ivar