Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Electromagnetic shielding design is usually approached referring to nominal values of the main parameters. This could lead to malfunctioning devices and its performance differ widely from what was really aimed at or, worse, the final design product could even be physically unrealizable. ... Per saperne di più
In this work, we seek to simulate SAWs for a better understanding and to benchmark the currently available cloud computing possibilities of COMSOL Multiphysics® software. By using the MEMS module we demonstrate 3D models with reduced geometry to achieve principle information about the ... Per saperne di più
Using the Solid Mechanics interface, a model is set up to investigate the impact of static stress on a bicycle chain for different geometries related to three chain generations. A contact model is used to induce the stress. Plastic deformation is taken into account. Based on the ... Per saperne di più
Resistive heating filaments used in high temperature applications at 2000°C and above are often made of refractory metals. The lifetime of such filaments is mainly limited by creep deformations which can in the worst case lead to a short circuit between filaments and other furnace ... Per saperne di più
Unmanned aerial vehicles (UAVs) have recently received great interest due to their great potential in both military and civil applications [1-4]. Testing and construction of UAVs is expensive and time consuming and a simulation approach can help to reduce cost for both design and tests. ... Per saperne di più
In recent years the thermal behavior of electric machines is an attractive research topic. Due to the complexity of the problem, several approaches that exploit FEM analysis have been developed and presented in literature. In this research a 3D thermo-fluid dynamic simulation of an ... Per saperne di più
This work shows the results of modeling of piezoelectric transducers used to recover energy from mechanical vibrations. The analysis consists of usefulness of commercial ceramic PZT transducers to power electronic systems. Determined output load characteristics, characteristics of the ... Per saperne di più
An ion trap resonator, used for mass spectrometry, is investigated. Simulations are used to define the stabilization criterion of ion trajectories by optimization of the electrode configurations. The ion interactions are investigated and shown to help in reduction of ion-diffusion. Space ... Per saperne di più
At the Fontys University of Applied Physics (The Netherlands) a plasma etcher has been acquired for educational purposes. The machine operates at low power up to 30 Watt and is driven with a magnetic coil at 13.56 MHz. The use of COMSOL Multiphysics software will be discussed to simulate ... Per saperne di più
Radioactive waste repositories include barriers that work to contain the waste, thereby protecting human health and the environment. In deep geological disposal systems, barriers include the natural geological barrier and the engineered barrier system (EBS). The ability of the EBS to ... Per saperne di più