Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
The reduction of energy consumption in the building sector (nearly 40% of the energy consumption in Europe) is a real challenge to achieve the objective of the “2020 European climate and energy package”. In recent years, great interest is observed for the Stirling thermoacoustic ... Per saperne di più
The control of the hydration during the thermal process of dates is crucial in order to save energy and to obtain a good quality for the final product. In this work, a theoretical model was developed in COMSOL Multiphysics software to describe the mass transfer phenomena involved in this ... Per saperne di più
Many of fibrous materials are very good sound absorbers, because the acoustic waves, which propagate in air and penetrate a fibrous layer, interact with the fibers so that the wave energy is dissipated. The dissipation is related to some viscous and thermal effects occurring on the micro ... Per saperne di più
This publication aims to investigate conjugate heat and mass transfer around a clothed virtual manikin. This research can be performed at different scales: (1) at material scale where a piece of textile is investigated in 1D or 2D space or (2) at system level where a clothed cylindrical ... Per saperne di più
For our simulation we used the Piezoelectric Devices interface. The structure was set with (clamped) fix constraint boundaries to both ends. The bottom electrode was set to be the ground for the electrostatic physics and the top electrode was set to be a Terminal with potential of 10V. A ... Per saperne di più
Electroacoustic resonators employing surface acoustic waves (SAW) are commercially widely used in RF filters, low noise frequency sources as well as various sensors. In all of these applications the resonance quality factor appears to be a limiting performance factor. Quite often ... Per saperne di più
A 1D-axisymmetric model was built to represent the drying of a single d’Ente plum to d’Agen prune. Underlying assumptions of the model were those of Di Matteo et al. 2003. Sorption isotherms of plum come from Tsami et al, 1990 and equation structure of apparent water diffusion ... Per saperne di più
The formation of porosities in spot laser welding depends on complex thermo-hydraulic phenomena. To understand and control these mechanisms, the COMSOL Multiphysics® software is used to model both the interaction and cooling stages of an isolated impact made with a Nd:YAG pulsed laser. ... Per saperne di più
The aim of the simulation is to study the behavior of a particular arrangement of a sealing system made of a Toroidal Spring Coil encapsulated in an thin casing, which is provided with a circumpherential cut to permit the pressure fill it inside. The mechanical simulation implemented ... Per saperne di più
The use of LEDs package for lighting presents a thermal problem. In fact, 70% of the energy consumption is converted to heat. This affects widely the LEDs performance especially lifetime and luminous efficiency. Thermal management of LED is interested in natural convection cooling. The ... Per saperne di più