Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Pulse-echo FEM simulation is seldom found in literature for ultrasound imaging array probes, since the complete modeling of such device is extremely complicated. Nevertheless, the 2D FEM described in the present work was successful, thanks to the following design procedure (see figure): ... Per saperne di più
Turbo compressors can generate high frequency tonal noise, causing nuisance in the environment. As the noise is radiated from the piping, a silencer is installed between the compressor and the pipe system. Commonly an absorption silencer is applied, which is a vessel that contains ... Per saperne di più
Simulation on loudspeaker drivers require a conventional fully coupled vibro-acoustic model to capture all effect. An accurate vibroacoustic model can be time-consuming to solve, especially in 3D. In practical applications, this results in poor efficiency concerning the decision-making ... Per saperne di più
This study presents a rotordynamic analysis of a rotor on hydrodynamic bearings using COMSOL Multiphysics®. In this paper, the complexity of the model is gradually increased. Starting point of the analysis is the modal analysis of the rotor in free-free conditions. A Reynolds model is ... Per saperne di più
Sound vibrations are collected from the external environment by the eardrum and are guided to the basilar membrane in the cochlea. Pressure differences in the two scalae of the cochlea result in a traveling wave on the basilar membrane. The tiny displacements are detected by the ... Per saperne di più
Pinna Related Transfer Functions (PRTFs) are signal processing models that represent the modifications undergone by the acoustic signal as it interacts with the listener’s pinna (outer ear). PRTFs are used to generate binaural sounds, especially those coming from an elevation. The ... Per saperne di più
Measuring geoacoustic parameters of underwater sediments is important for accurate modeling of underwater acoustic propagation. While the density and compressional wave speeds can be directly measured in sediments, shear wave speeds are difficult to measure because they are highly ... Per saperne di più
The dumbbell geometry is an ideal shape for testing the compressive strength of advanced ceramic materials. This paper details the combined use of COMSOL Multiphysics® and LiveLink™ for MATLAB® for determining the elastic properties of dumbbell-shaped samples by measuring their acoustic ... Per saperne di più
Due to the increasing demand for hydrogen gas sensors for applications such as automation, transportation, or environmental monitoring, the need for sensitive and reliable sensors with a short response time is increasing. This paper presents an empirical model that studies the ... Per saperne di più
Anomalous acoustic streaming is observed from sharp edges of vibrating solid bodies in fluids. The streaming velocities can be orders of magnitude higher than expected from the Rayleigh streaming at similar amplitudes of vibrations. Acoustic velocity of a fluid relative to a solid body ... Per saperne di più