Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Air pollution caused by particulate matter (PM) is one of the most severe issues in urban environments. Urban green infrastructure (UGI), in particular green walls, have been proven to be capable of capturing PM via deposition on leaves. This phenomenon was assessed by numerical ... Per saperne di più
Energy harvesting from a fluid flow using piezoelectric materials is a relatively recent topic that has been investigated experimentally and numerically [1, 2]. Its possible application in natural water currents represents an interesting strategy to easily harvest renewable energy from ... Per saperne di più
The mesh is a key component in numerical simulations as it represents the spatial discretization of the model geometry. To accurately measure the variation of the unknowns, a relevant mesh should have a high density of degrees of freedom in regions where the norm of the gradient of the ... Per saperne di più
Solar systems are used around the world, especially in sunny and dry regions, to convert radiation energy from the sun into electricity or heat. Soiling, as dust deposition onto surfaces is commonly called, hinders this conversion of the solar energy by blocking of the incidenting light. ... Per saperne di più
Water disinfection using UV light is a well-known technology. Conventionally, mercury based cylindrical lamps are used, however, recently LED based UV lamps have emerged on a commercial scale. These devices hold several advantages compared to the conventional lamps, e.g. being mercury ... Per saperne di più
Hydrocyclones are industrial devices used as processing units in fluid and particle technology. A hydrocyclone is an apparatus consisting of a cylindrical or a cylindrical-conical body with a tangential or involute entrance to admit the fluid inside. There are also two opposite exits, ... Per saperne di più
The measurement and regulation of particulate matter to improve outside air quality advanced a lot over the last decades. This also made it necessary to develop primary standards for calibrating these measurement systems and in future the composition of relevant aerosols will be taken ... Per saperne di più
The flow simulation of solid, particulate materials is still challenging, even though estimations show that three-quarters of products and raw materials are present as granules form in the industry. We can think of grain in the agriculture, raw materials of the glass industry, granulated ... Per saperne di più
In the framework of the Austrian FFG project SaLüΗ!, a compact mechanical ventilation system with integrated micro-heat pump was developed. The aim was a high level of prefabrication and a compact design allowing for installation also in small flats, e.g. into the façade. Due to the ... Per saperne di più
Whereas some bearings designed in the 19th century are still working properly nowadays, some others which were recently designed encountered premature failures. Tribological applications, such as journal bearings or rolling element bearings, are generally ruled by complicated ... Per saperne di più