Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Pulsed DC technology has led to the design of cost-effective deposition systems and to improved film properties, compared to conventional rf systems. In this work, a two-dimensional finite element model is used to investigate the high frequency pulsed DC discharges in nitrogen. The study ... Per saperne di più
The knowledge of the behavior of electric arcs between plane electrodes is in high interest due to their presence in industrial applications such as low voltage circuit breakers. In this contribution, numerical simulations of an electric arc displacement due to electro-magnetic forces ... Per saperne di più
NASA’s future human exploration missions will require chemical processing plants to convert local resources into consumables to support astronaut activities [1]. The thin and mostly carbon dioxide atmosphere of Mars is estimated to have 5 – 10 particles/cm3 with diameter of 3.2 – 5 μm ... Per saperne di più
Spark Plasma Sintering (SPS) is a promising rapid consolidation technique that allows a better understanding and manipulation of sintering kinetics and therefore makes it possible to obtain polycrystalline materials (ceramic or metallic) with tailored microstructures. A numerical ... Per saperne di più
Today’s driver hardware for High-intensity discharge (HID) lamps is bulky, expensive and not particularly energy-efficient. A downscaling of the devices seems possible by increasing the operation frequency from typically 400 Hz to some hundred kilohertz. However, efforts to design high ... Per saperne di più
One of the challenges associated with the wire-arc additive manufacture (WAAM) of metals is to provide adequate inert gas shielding, not only for the molten pool, but also for the long reactive metal surface that follows it. For Ti-6Al-4V, it has been shown that increased levels of ... Per saperne di più
The Helicon Injected Inertial Plasma Electrostatic Rocket (HIIPER) is an electric space propulsion concept being studied that utilizes a helicon source to generate a plasma and metal grids from inertial electrostatic confinement (IEC) fusion experiments to accelerate ions, generating a ... Per saperne di più
A Finite element model of plasma sprayed TBC’s was developed to estimate the stress induced by thermal cycling experiments. A heat transfer analysis was performed to evaluate the temperature distribution on the specimen during the cooling under an impinging air jet; temperature ... Per saperne di più
Actual trends in lightweight construction and safety-relevant technologies cause an increasing demand for reliable design of joining connections. Increasing power density and compact design require dimensioning of joints with low safety factors. Thereby additional security measures are ... Per saperne di più
Fusion is a form of nuclear energy which has impressive advantages from the point of view of fuel reserves, environmental impact and safety. If successful, fusion energy would ensure a safe, resource conserving, environmentally friendly power supply for future generations. In a world ... Per saperne di più