Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem when plotting two isotherms
Posted 17 ago 2016, 10:26 GMT-4 2 Replies
Please login with a confirmed email address before reporting spam
Hello, I am simulating two laser beams in a piece of Aluminum. The beams are separated by a distance of 150 microns with a velocity of 40mm/s. The first beam goes from 0 to 0.5 s, while the second starts in 0.51s to 1.01s in the opposite direction.
I want to plot both of isotherms, but in the same plane, one at 0.25s and the other in 0.76s. I want to know if there is a way to mix two 2D plots.
I want to plot both of isotherms, but in the same plane, one at 0.25s and the other in 0.76s. I want to know if there is a way to mix two 2D plots.
2 Replies Last Post 18 ago 2016, 10:22 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
I want to plot both of isotherms, but in the same plane, one at 0.25s and the other in 0.76s. I want to know if there is a way to mix two 2D plots.
Add two contour plots to the same 2D plot group. By default the plots will use the data set specified in the plot group (Data=From parent). You should change this so that the two plots select the data set explicitly. Select the same data set in both plots, but let the evaluation times differ.
Please login with a confirmed email address before reporting spam
Posted:
8 years ago
Thank you Gunnard, it worked perfectly.