Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

simulate a stand wave tube

Posted 30 nov 2016, 07:31 GMT-5 Acoustics & Vibrations, Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 5.2a 2 Replies

Wen Hsiung
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi, everyone. I am new to comsol. I want to make a simulation of measurement of absorption coefficients in standing wave tube;
here are my problem I encountered：
I don't how to add a plane sound wave to a closed wall boundary, I mean
I use a cuboid simulate the air in the tube, and all the surfaces are set hard sound boundary， but how to add a plane sound wave to the air？

i try to set a end surface of cuboid as [plane wave radiation]，and then add [incident pressure field] ,but then this surface is not hard sound boundary.

all I want is to simulate the 1th fig in www.acs.psu.edu/drussell/Demos/SWR/AbsorptionCoeff.pdf.

and here is my cuboid picture.
imgsrc.baidu.com/forum/w%3D580/sign=d9a7f68305f431adbcd243317b36ac0f/ec05b322720e0cf3bcda5dea0346f21fbe09aa4d.jpg
2 Replies Last Post 30 gen 2017, 00:50 GMT-5
COMSOL Moderator

Hello Wen Hsiung

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Mads Herring Jensen COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 19 gen 2017, 04:02 GMT-5
Hi Wen

I think you want to use the Background Pressure Field domain condition. This will let you set up a plane wave in the system, although this is probably not the same as your measurement setup. I guess that in the setup there is a speaker at one end? To model the speaker I would set the end wall to a normal velocity or displacement condition.

Best regards
Mads
Hi Wen I think you want to use the Background Pressure Field domain condition. This will let you set up a plane wave in the system, although this is probably not the same as your measurement setup. I guess that in the setup there is a speaker at one end? To model the speaker I would set the end wall to a normal velocity or displacement condition. Best regards Mads
Linus
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 30 gen 2017, 00:50 GMT-5
Hi Wen,

You could instead consider the use of "Plane Wave Radiation" boundary condition to generate an incident plane wave at the end of the upstream domain.

In "Plane Wave Radiation" boundary condition, right-click and select "Incident Wave". From here, just define 1 Pa as the pressure amplitude and select the furthest wall as your "speaker".

It should work fine.

--
Regards,
Linus Ang
Hi Wen, You could instead consider the use of "Plane Wave Radiation" boundary condition to generate an incident plane wave at the end of the upstream domain. In "Plane Wave Radiation" boundary condition, right-click and select "Incident Wave". From here, just define 1 Pa as the pressure amplitude and select the furthest wall as your "speaker". It should work fine. -- Regards, Linus Ang

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content