Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Working with a resonant transformer
Posted 16 mag 2017, 03:03 GMT-4 Modeling Tools & Definitions, Parameters, Variables, & Functions, Studies & Solvers Version 5.2a 0 Replies
Please login with a confirmed email address before reporting spam
I'm currently working on a mf-Model, taking a closer look on a transformer which is to be set resonant at 25 kHz. I set it up quite similar to the "E Core Transformer" example from COMSOL. I used a circuit to define it and used a capacitor in series to the inductor to make the transformer resonant. Now, if I change any parameters (windings, resistances, frequency) I have to reset the capacitance every single time. Now that COMSOL needs to calculate the transformer first to "know" its inductance I guess its rather difficult to let it calculate the needed capacitance with that inductance, isn't it?
Thanks in advance,
sincerely,
Philipp.
Hello Philipp Gelmroth
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.