Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving solid domain within a fluid domain

Please login with a confirmed email address before reporting spam

Objective of my model: An electrostatic probe is removed from an initially static fluid. The speed of probe extraction is varied and the resulting disturbances of the fluid are observed.

So far I have built a deformed geometry and successfully moved the probe. In this simulation, the laminar flow module was disabled. I then ran a second simulation in which I only solved for the laminar flow module while using the result of the previous simulation (the deformed mesh result) for the deformed mesh. That is, under "values of variables not solved for" I used the result of the first simulation. I expected to have results in which the fluid is disturbed by the motion of the probe but the fluid doesn't seem to "see" the motion of the probe. That is, the fluid remains static. I know this result is unphysical. What am I missing? Why can't the fluid see the probe's motion?


1 Reply Last Post 28 mag 2017, 20:38 GMT-4

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 28 mag 2017, 20:38 GMT-4
Updated: 7 years ago 28 mag 2017, 20:41 GMT-4
Jacob,
Have you coupled the fluid flow to the deformed geometry?
You need to do this by changing the wall boundary condition in the fluid flow physic. In your case, the solid is moving, so you need to define a moving wall having the velocities equal to the moving mesh.
Amin,
Jacob, Have you coupled the fluid flow to the deformed geometry? You need to do this by changing the wall boundary condition in the fluid flow physic. In your case, the solid is moving, so you need to define a moving wall having the velocities equal to the moving mesh. Amin,

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.