Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
laminar flow
Posted 7 mar 2011, 00:13 GMT-5 Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
Sir i have designed one sensor ...With application of some force it is giving strain...Now i want to put the sensor in the boundary where laminar flow is applied.... Now i want to calculate the strain when the flow is applied....FOr this u have told me to use FSI module...I have only license for AC/DC module ana MEMS module in my college...Iam solving with the help of these two models for the strain but iam not getting the output...NOw wat i can do????
1 Reply Last Post 7 mar 2011, 01:14 GMT-5
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I believe the FSI physics is part of the MEMS, check under FluidFlow (with V4 the MEMS physics are no longer under a "MEMS" title, but distributed under the different physics, this is valid for all modules).
You should get updated to the latest version, you will be less frustrated
--
Good luck
Ivar
I believe the FSI physics is part of the MEMS, check under FluidFlow (with V4 the MEMS physics are no longer under a "MEMS" title, but distributed under the different physics, this is valid for all modules).
You should get updated to the latest version, you will be less frustrated
--
Good luck
Ivar