Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency-dependent loading with parametric sweep

Posted 9 mar 2011, 06:07 GMT-5 Parameters, Variables, & Functions, Studies & Solvers, Structural Mechanics Version 4.1 3 Replies

Gee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am doing a Harmonic Analysis, but what I really want to is to apply a frequency sweep but with different boundary loads for each frequency.

Does anyone know if this is possible.


Many thanks
3 Replies Last Post 11 mar 2011, 01:33 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 mar 2011, 10:59 GMT-5
Hi

the frequency sweep parameter is "freq" so why not, on a simple model you can predict analytically, you add a BC condition linked to "freq" or omega=2*pi*freq

--
Good luck
Ivar
Hi the frequency sweep parameter is "freq" so why not, on a simple model you can predict analytically, you add a BC condition linked to "freq" or omega=2*pi*freq -- Good luck Ivar
Gee
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 10 mar 2011, 11:22 GMT-5
Thanks Ivar,

I am still not clear on how to implement this. Instead of carrying out separate runs at each frequency using different amplitudes, I want to tell do a parameter sweep but tell comsol at each frequency to use a different amplitude which I will supply. This will save a whole load of time. I am not sure how to actually implement this in Comsol.

Cheers
Thanks Ivar, I am still not clear on how to implement this. Instead of carrying out separate runs at each frequency using different amplitudes, I want to tell do a parameter sweep but tell comsol at each frequency to use a different amplitude which I will supply. This will save a whole load of time. I am not sure how to actually implement this in Comsol. Cheers
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 11 mar 2011, 01:33 GMT-5
Hi

I'm not sure I catch you:

a) use a double parametrical sweep
b) define V(freq) and set up an analytical or interpolated function such that V(freq) takes the shape at the given frequency as you want

--
Good luck
Ivar
Hi I'm not sure I catch you: a) use a double parametrical sweep b) define V(freq) and set up an analytical or interpolated function such that V(freq) takes the shape at the given frequency as you want -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content