Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Electric current and link with Magnetic and Electric fields module
Posted 21 set 2017, 10:19 GMT-4 Electromagnetics, Electromagnetic Heating, Low-Frequency Electromagnetics Version 5.3 0 Replies
Please login with a confirmed email address before reporting spam
Hi Everyone,
I would like to run a model of 3 conducting layer between them there is insulation. There are a connection between the 3 layers at one pooint that allows the currents flow. I have done this by making an electric current module that i define the current that flows from the upper layer to the lower layer.
Afterwards, i link the current densities that are generated by the electric current module with the magnetic and electric fields module. Then i run both modules.
I noticed some points. 1- There are some currents that flow into the insulating parts ( Not expected) 2- The electromagnetic losses that are generated from both modules are different. ( I run stationnary model)
Can you give me more details how to tackle this problem.
Ahmed Hemeida
Hello Ahmed Hemeida
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.