Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
COMSOL module and functionality for acoustic simulation of large room
Posted 15 nov 2017, 11:00 GMT-5 General, Acoustics & Vibrations, Modeling Tools & Definitions 2 Replies
Please login with a confirmed email address before reporting spam
I would like to use comsol for my project which deals with time domain acoustic simulation (in ultrasound domain) of a large room. Of Special interest are following:
1). Placing of multiple source at various location in a room. 2). For each source I want to specify what kind of signal it should emit. (could be a chirp, a sine burst or an Impulse). 3). Setting the reflection coefficient walls. 4). placing of multiple receivers in the room. 5). sound pressure level at each receiver. 6). Visualization of reflections from the wall.
I would like to request , if anyone knows weather simulation with these functionalities is possible or not in COMSOl, and if yes, what all modules do I need, then please let me know. As per my research I would need Multiphysics and Acoustics.
Please login with a confirmed email address before reporting spam
Dear akjain,
please see my answer in the Support Center : https://www.comsol.de/support. Best regards, Gilles
Please login with a confirmed email address before reporting spam
Dear akjain,
please see my answer in the Support Center : https://www.comsol.de/support. Best regards, Gilles
Hi Gilles,
Can you also send your answer to me, as we have a similar problem over here.
Kind regards, Steven