Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Cricular cross section 2D modelling in cantilever carbon nanotube problem

Please login with a confirmed email address before reporting spam

Hello,
I've been working with pull-in and pul-out voltages for a carbon nanotube NEM system.
Currently I'm using 2D modelling but I cannot get accurate results due to the thickness definition. I would like to know if there is some way I can model the circular coss section in 2D? I've read about using the 2D axysimmetric coordinate system but all my problem uses cartesian coordinates except for the tube shape so I do not think it's a good idea.

Thank you for your time


Best regards,


David Felipe Carvajal
Universidad de los Andes
Colombia

1 Reply Last Post 5 apr 2011, 01:34 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 5 apr 2011, 01:34 GMT-4
Hi

Axisymmetry means that the axis is NOT moving radially, which is a specific symmetry condition that might not be what you want. The only other way I see is to set the thickness to something reasonable, but still, you will get "fringe" effects

So you might need to use 3D ...

--
Good luck
Ivar
Hi Axisymmetry means that the axis is NOT moving radially, which is a specific symmetry condition that might not be what you want. The only other way I see is to set the thickness to something reasonable, but still, you will get "fringe" effects So you might need to use 3D ... -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.