Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

script difference between 4.0a and 4.1

Posted 7 apr 2011, 06:46 GMT-4 Interfacing, Studies & Solvers Version 4.0a, Version 4.1 2 Replies

Yang Yulong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

The model.m can be solved without any warning in 4.0a, but cannot get solved in4.1 comsol with matlab. However, model can be established with geometry, material and mesh attribute, just can not get solved.

so, any syntax change has been made in comsol 4.1?
===================================================
Here is the error:
===================================================

??? Java exception occurred:
Exception:
com.comsol.util.exceptions.FlException: The following feature has encountered a problem
Messages:
The following feature has encountered a problem


Stack trace:

at com.comsol.solver.SolverOperation.addError(Unknown Source)

at com.comsol.solver.SolverOperation.execute(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl.a(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl.j(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl.runAll(Unknown Source)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at com.comsol.clientserver.impl.JobImpl.run(Unknown Source)

at com.comsol.server.internal.b.a(Unknown Source)

at com.comsol.server.internal.b.a(Unknown Source)

at com.comsol.server.internal.b$h.a(Unknown Source)

at com.comsol.server.internal.b$h.a(Unknown Source)

at com.comsol.server.internal.b$h$a.run(Unknown Source)

at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)

at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)



at com.comsol.model.clientserver.ClientManagerImpl.a(Unknown Source)

at com.comsol.model.clientserver.ClientManagerImpl.runServerJob(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl$c.a(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl$c.execute(Unknown Source)

at com.comsol.model.clientserver.ClientManagerImpl$d.call(Unknown Source)

at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)

at java.util.concurrent.FutureTask.run(Unknown Source)

at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)

at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)

at java.lang.Thread.run(Unknown Source)

Caused by: Exception:
com.comsol.util.exceptions.FlException: The following feature has encountered a problem
Messages:
The following feature has encountered a problem


at com.comsol.solver.SolverOperation.addError(Unknown Source)

at com.comsol.solver.SolverOperation.execute(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl.a(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl.j(Unknown Source)

at com.comsol.model.impl.SolverSequenceImpl.runAll(Unknown Source)

at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)

at java.lang.reflect.Method.invoke(Unknown Source)

at com.comsol.clientserver.impl.JobImpl.run(Unknown Source)

at com.comsol.server.internal.b.a(Unknown Source)

at com.comsol.server.internal.b.a(Unknown Source)

at com.comsol.server.internal.b$h.a(Unknown Source)

at com.comsol.server.internal.b$h.a(Unknown Source)

at com.comsol.server.internal.b$h$a.run(Unknown Source)

... 3 more
2 Replies Last Post 7 apr 2011, 07:49 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 apr 2011, 07:28 GMT-4
Hi

Have you checked the release notes?
Either at the conference in 2009 and confirmed at the 2010, and/or in the notes it was announced that there were changes in the early v4.0, and that one should not expect full transfer before 4.1 or 4.2. That is what I understood, and I remake my models in the new versions, therefore I notice little f these kind of issues

--
Good luck
Ivar
Hi Have you checked the release notes? Either at the conference in 2009 and confirmed at the 2010, and/or in the notes it was announced that there were changes in the early v4.0, and that one should not expect full transfer before 4.1 or 4.2. That is what I understood, and I remake my models in the new versions, therefore I notice little f these kind of issues -- Good luck Ivar
Yang Yulong
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 apr 2011, 07:49 GMT-4
Thanks very much , Ivar.

what confused me is that comsol4.1 desktop even can successfully retrieve the 4.0a model from 4.1 server and then get it solved. But the server itself can not do this , maybe some changes should be made in m file.

Anyway, I'd like to check the release note. Thank you for your reminder.
Thanks very much , Ivar. what confused me is that comsol4.1 desktop even can successfully retrieve the 4.0a model from 4.1 server and then get it solved. But the server itself can not do this , maybe some changes should be made in m file. Anyway, I'd like to check the release note. Thank you for your reminder.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content