Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Current Source and Sink

Posted 18 mag 2018, 04:01 GMT-4 Electromagnetics, Low-Frequency Electromagnetics 4 Replies

Jonas Schulz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

I have a simple pair of electrodes, one with a current excitation of 1mA and a counter electrode with a current excitation -1mA, which is meant to be the "Boundary current sink" for the "boundary current source".

However, my computations won´t stop and simply run forever, so I´m not able to retrieve any results, from my simulation.

My question is, wether it is the right approach for this kind of setup, to use the Boundary Current Source feature for a source and a sink?

Thanks for the help Best regards

Jonas

Attachments:

4 Replies Last Post 19 mag 2018, 05:10 GMT-4
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 18 mag 2018, 07:50 GMT-4

Jonas,

Attached is working model with appropriate boubdary conditions.

Regards,

Sergei

Jonas, Attached is working model with appropriate boubdary conditions. Regards, Sergei

Attachments:

Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 18 mag 2018, 09:48 GMT-4

Hi Sergei,

I was wondering which way this internal boundary source works? It seems to violate current conservation. So I obviously I don't understand it. In what case would you apply it?

Cheers Edgar

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi Sergei, I was wondering which way this internal boundary source works? It seems to violate current conservation. So I obviously I don't understand it. In what case would you apply it? Cheers Edgar
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 18 mag 2018, 11:35 GMT-4

Edgar,

Yes, open current path would violate current conservation law for the Magnetic Fields (mf) physics interface. Electric Currents (ec) interface doesn't require explicit modeling of closed loop for current flow. As I understood the problem, it is just a heat source for tissue heating.

Regards, Sergei

Edgar, Yes, open current path would violate current conservation law for the Magnetic Fields (mf) physics interface. Electric Currents (ec) interface doesn't require explicit modeling of closed loop for current flow. As I understood the problem, it is just a heat source for tissue heating. Regards, Sergei
Jonas Schulz
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 19 mag 2018, 05:10 GMT-4

Jonas,

Attached is working model with appropriate boubdary conditions.

Regards,

Sergei

Thanks for the Help.

I just can´t quite see, where in the model you applied some changes. Everything looks the same, but the results from the one I uploaded are different.

Best regards

Jonas

>Jonas, > >Attached is working model with appropriate boubdary conditions. > >Regards, > >Sergei Thanks for the Help. I just can´t quite see, where in the model you applied some changes. Everything looks the same, but the results from the one I uploaded are different. Best regards Jonas

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.