Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Single Port Coplanar Waveguide Resonator for measuring reflection
Posted 2 lug 2019, 13:35 GMT-4 Low-Frequency Electromagnetics, RF & Microwave Engineering Version 5.4 0 Replies
Please login with a confirmed email address before reporting spam
Hi all,
I am trying to simulate a coplanar waveguide resonator and obtain the resonant frequency and Q-factor using RF module in COMSOL. I used the lumped port boundary condition and with two ports (with wave excitation ON for one of them), I get resonance at around 90 GHz. However, I want to simulate a CPW resonator with a single port, as experimentally I will be measuring the reflection (with resonance corresponding to a dip in 
).
When I remove the second port, I see no sign of resonance despite sweeping frequency from 2 to 250 GHz. is always > 
dB.
It would be great if someone could give some pointers about anything that I may be missing here!
Tl;dr: I want a CPW resonator with a single port to show a dip in indicating resonance.
Thanks!
Hello Chaitrali Duse
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.