Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Contact Pairs in PDE mode
Posted 9 dic 2011, 12:36 GMT-5 Structural Mechanics Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
I'm trying to model a delamination located between different layers of a laminated composite plate. To recreate the so called clapping effect, i.e., the opening and closing of the delamination, I'm trying to use a contact pair between the surfaces of the two layers. Anyway, as I built the model in PDE mode (in order to implement the constitutive laws of each layer), I can't find a way to introduce the physics in the contact pair window or to manage with all those entities (penalty factor, pressure on the surfaces in contact etc) which are mentioned in all those contact problems approached using the structural mechanics module.
Any answer would be appreciated
Michele
Hello Michele Pasquali
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Have you ever complish your problem by COMSOL? I am also interested in this problem.
Yujue Wang