Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
why multiple modes in rectangular cavity when it is coupling?
Posted 12 feb 2020, 05:14 GMT-5 1 Reply
Please login with a confirmed email address before reporting spam
When i am performing a simulation of 1 cm radius cylindrical cavity with comsol multiphysics, the obtained frequency eigen value for TM010 mode is 11.47GHz. But when I am adding the coupling structures ( coaxial cable) it get excited at two modes, one mode is around 10 GHz and other mode is around 12GHz.
Why this is happening?
simulation results are attached here: simulation results
Please login with a confirmed email address before reporting spam
You changed the geometry by adding the structures and thus introduced new possible modes and/or new boundary conditions. The eigenmodes and eigenfrequencies of any system that exhibits oscillations, whether it is an RF cavity, an antenna, a swinging pendulum, a mass on a spring, a vibrating quartz cystal, etc., are not independent of the structures and/or environments that couple to them, unless those couplings are made weak enough that they can be neglected.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara