Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol and simion

Posted 17 mag 2020, 10:57 GMT-4 Low-Frequency Electromagnetics 2 Replies

Zang Retain
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I recently did some electric potential simulation with Comsol and Simion. I found the results are different for these two software, does anybody know why?

2 Replies Last Post 17 mag 2020, 12:26 GMT-4
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 17 mag 2020, 11:12 GMT-4

Simion and Comsol are pretty different animals. Without telling details about your setup, methods and results nobody can help you.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Simion and Comsol are pretty different animals. Without telling details about your setup, methods and results nobody can help you.
Dave Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 17 mag 2020, 12:26 GMT-4

If two experiments or two pieces of software give different answers, all you know is that one or more of them is wrong.

When starting out it is best to solve a problem where you know the answer, or at least know the answer in some part of the geometry.

When you post here there is a link at the bottom that explains how to reduce the size of your model so you can post it. Posting your model is the best way to get actual advice.

If two experiments or two pieces of software give different answers, all you know is that one or more of them is wrong. When starting out it is best to solve a problem where you know the answer, or at least know the answer in some part of the geometry. When you post here there is a link at the bottom that explains how to reduce the size of your model so you can post it. Posting your model is the best way to get actual advice.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content