Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
plot versus time
Posted 9 feb 2012, 00:48 GMT-5 Version 4.0a 3 Replies
Please login with a confirmed email address before reporting spam
I try to solve my problem in time domain
I apply sine wave on a conductor of underground cable to study the elecrtic filed in insulation
i get the distribution of electric field at 10 sec by setting time interval (0,0.1,10)
and in another run (i got it at 20 sec) by setting time interval (0,0.1,20)
and in another run ( i got it at 30 sec) by setting time interval (0,0.1,30)
finally i want to draw electric field at specific location versus time how can i get it?
thank you
Please login with a confirmed email address before reporting spam
are you looking after a transient or of the steady state behaviour with a sinus type wave ? Because time solver is for transient (amplitude changes randomly, exponentially etc with time, while the harmonic solvers are there for the constant ampolitude constant frequency operation (ie. 220VAC operation
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Actually i want to apply sin wave ( f=10 khz and voltage = 15 kV) for four houres on the surface of conductor and i want to see the distribution of electric field around conductor but i don't know how?
Please login with a confirmed email address before reporting spam
then use the harmonic development / solver, check the doc
But what will vary over hours ?
--
Good luck
Ivar