Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

3-D Meshing Help

Posted 17 apr 2012, 12:30 GMT-4 Heat Transfer & Phase Change, Geometry, Mesh Version 4.2a 4 Replies

Lucas Kyriazidis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good Afternoon,
I am having some trouble trying to mesh my current geometry. In the geometry, there are many relatively thin plates, where I have tried to do a free triangular mesh to keep the number of elements low. I am wondering what other methods I should try to mesh this geometry, I have also tried a swept mesh but I am not thoroughly sure what this does. If anyone has any suggestions I would love to hear them. The automated meshing is taking way too long and hoping for a quicker mesh generation sequence.
Thanks,
Lucas

Attachments:

4 Replies Last Post 17 apr 2012, 16:26 GMT-4
Lucas Kyriazidis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 apr 2012, 13:09 GMT-4
This is a relatively simple case, an aluminum assembly immersed in water. I plan on adding some heat sources to various plates, but I am curious to why a simple geometry is giving me meshing problems...
This is a relatively simple case, an aluminum assembly immersed in water. I plan on adding some heat sources to various plates, but I am curious to why a simple geometry is giving me meshing problems...
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 apr 2012, 13:25 GMT-4
1. in geometry, create a box "a" that includes all of the plates and water between them
2. mesh the top of box "a" with quad mesh
3. apply swept mesh to box "a"
4. convert the boundaries of box "a" to triangles
5. mesh the rest with tetrahedral
1. in geometry, create a box "a" that includes all of the plates and water between them 2. mesh the top of box "a" with quad mesh 3. apply swept mesh to box "a" 4. convert the boundaries of box "a" to triangles 5. mesh the rest with tetrahedral
Lucas Kyriazidis
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 apr 2012, 14:54 GMT-4

1. in geometry, create a box "a" that includes all of the plates and water between them
2. mesh the top of box "a" with quad mesh
3. apply swept mesh to box "a"
4. convert the boundaries of box "a" to triangles
5. mesh the rest with tetrahedral


Would this be done with inserting a block, then creating a union. Sorry I am fairly new with COMSOL.
[QUOTE] 1. in geometry, create a box "a" that includes all of the plates and water between them 2. mesh the top of box "a" with quad mesh 3. apply swept mesh to box "a" 4. convert the boundaries of box "a" to triangles 5. mesh the rest with tetrahedral [/QUOTE] Would this be done with inserting a block, then creating a union. Sorry I am fairly new with COMSOL.
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 apr 2012, 16:26 GMT-4
No, union has nothing to do with it.
No, union has nothing to do with it.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content