Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Thermal Expansion

Posted 4 mag 2012, 05:09 GMT-4 Version 4.2a 1 Reply

Vineet
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam


I am modeling a Micro-heater. As i am using Joule heating with thermal expansion, i want to plot thermal expansion.
guide me to obtain the thermal expansion 3-D surface plot


--
Vineet Bansal
Project Associate, NPMASS
Electronic Science Department
Kurukshetra University, Haryana
1 Reply Last Post 4 mag 2012, 11:08 GMT-4
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 4 mag 2012, 11:08 GMT-4
Hi

try a volume plot - volume with ts.disp as variable (I believe its the default one that comes up, if it's not already part of the 1-2 default plots

then you can look at the detailed displacements with u,v,w, or directly the strain or stress tensor components

--
Good luck
Ivar
Hi try a volume plot - volume with ts.disp as variable (I believe its the default one that comes up, if it's not already part of the 1-2 default plots then you can look at the detailed displacements with u,v,w, or directly the strain or stress tensor components -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content